-
ScanningIon-ConductanceMicroscopy Ito CaMnO3 electrospinning Thermal rubber Ecoli neodymium_magnets Tungsten Indent Transparent Korea Bacterium optoelectronics Silicon Current OpticalWaveguide fifber BiFeO3 Polystyrene Protein Oxidation AtomicSteps Piranha EFMAmplitude plastics HafniumDioxide Lanthanum_aluminate ScanningSpreadingResistanceMicroscopy Conductance Electronics atomic_steps NUS_Physics dichalcogenide Composite
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm