-
cooling Typhimurium Hafnia PhaseImaging OrganicSemiconductor semifluorinated_alkanes TempControl Neodymium cannabidiol Ceramic #Materials Mfm FailureAnlaysis FrictionalForceMicroscopy HiVacuum Vortex single_layer PolyvinylAcetate Polyvinylidene Plug BlockCopolymer BTO Display Magnetostrictive hard_disk_media ito_film HydroGel Formamidinium_lead_iodide Ucl SolarCell HighAspect self-assembled_monolayer LFM Polypropylene SrTiO3
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm