400 878 6829 | | 联系我们 |    Global

True Non Contact Mode

For optimal performance with our AFM systems please request a quote from Park Systems. Mounted cantilevers are additionally tested. All probes that are not listed here from Adama Innovations, Nanosensors™, Nanotools GmbH, Nanoworld AG, BudgetSensors, Olympus Corp., MikroMasch, Applied Nano Structures, Inc. are possible to order from our probe store. Probes from other manufacturers also can be possible to order upon request for quotation. The performance of probes ordered from other sources are not guaranteed.

Probe Force Constant (N/m) Frequency (kHz ) Manufacture Short Description Quote
PPP-NCHR 42 330 Nanosensors ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (AI)		 Request for Quote

The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 3.5% of the cantilever length.

Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 22.5 - 37.5
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
SSS-NCHR 42 330 Nanosensors ▪ Non-contact cantilever with sharp tip
▪ Backside reflex coating (Al)
▪ Tip radius: 2 nm typical, < 5 nm max.		 Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 30 - 45
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
PPP-NCH 42 330 Nanosensors ▪ Non-contact cantilever with high resonant frequency Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 22.5 - 37.5
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
SSS-NCH 42 330 Nanosensors ▪ Non-contact cantilever with sharp tip
▪ Tip radius: 2 nm typical, < 5 nm max.		 Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 30 - 45
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
PPP-NCLR 48  190  Nanosensors  ▪ Non-contact cantilever with low resonant frequency
▪ Backside reflex coating (Al)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 7 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 236
SSS-NCLR 48 190 Nanosensors ▪ Non-contact cantilever with low resonant frequency
▪ Backside reflex coating (Al)
▪ Tip radius: 2 nm typical, < 5 nm max.		 Request for Quote
 
Technical Data Nominal Value Specified Range
Thickness /µm 7 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 236
PPP-NCL 48  190  Nanosensors ▪ Non-contact cantilever with low resonant frequency of ~ 200 kHz Request for Quote
 
Technical Data Nominal Value Specified Range
Thickness /µm 7 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 236
SSS-NCL  48  190  Nanosensors ▪ Non-contact cantilever with sharp tip
▪ Tip radius: 2 nm typical, < 5 nm max.		 Request for Quote
 
Technical Data Nominal Value Specified Range
Thickness /µm 7 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 196
NSC15/AL BS  40  325  Mikromasch ▪ Non-contact cantilever
▪ Backside reflex coating		  Request for Quote

Cantilevers of the 15 series are generally used in tapping mode for imaging hard samples, when high topographic and phase contrast are necessary. The 15 series is also good for non-contact AFM. 

Technical Data Nominal Value Specified Range
Thickness /µm 4 3.5 - 4.5
Mean Width /µm 30 27 - 33
Length /µm 125 120 - 130
Force Constant /(N/m) 40 20 - 80
Resonance Frequency /kHz 325 265 - 410
AR5-NCH  42  330  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 30 - 45
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
AR5-NCLR  48  190  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)▪ Backside reflex coating  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 7.0 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 236
AR5-NCL  48  190  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 7 6.0 - 8.0
Mean Width /µm 38 30 - 45
Length /µm 225 215 - 235
Force Constant /(N/m) 48 21 - 98
Resonance Frequency /kHz 190 146 - 236
AR5-NCHR  42  320  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
  Request Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 30 - 45
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
AR5T-NCHR  42  330  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ High aspect ratio portion of the tip tilted 13°		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 22.5 - 37.5
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
AR5T-NCH  42  330  Nanosensors ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ High aspect ratio portion of the tip tilted 13°		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.0 - 5.0
Mean Width /µm 30 22.5 - 37.5
Length /µm 125 115 - 135
Force Constant /(N/m) 42 10 - 130
Resonance Frequency /kHz 330 204 - 497
OMCL-AC160TS  26  300  Olympus ▪ Non-contact cantilever with high resonant frequency
▪ backside reflex coating
▪ Tip end visible from top		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 3.7  
Mean Width /µm 40  
Length /µm 160  
Force Constant /(N/m) 26  
Resonance Frequency /kHz 300 200 - 400
ATEC-NC  45  335  Nanosensors ▪ Non-contact cantilever
▪ Tip visibility from top		  Request for Quote

These tips are designed for non-contact or tapping mode imaging. They feature a tetrahedral tip that protrudes from the very end of the cantilever allowing it to be the only probe to offer real tip visibility from the top even if the probe is tilted.

Technical Data Nominal Value Specified Range
Thickness /µm 4.6 3.6 - 5.6
Mean Width /µm 45 40 - 50
Length /µm 160 150 - 170
Force Constant /(N/m) 45 12 - 110
Resonance Frequency /kHz 335 210 - 490
ACTA  37  300  AppNano ▪ Non-contact cantilever
▪ Backside reflex coating (Al)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4 3.5 - 4.5
Mean Width /µm 30 25 - 35
Length /µm 125 115 - 135
Force Constant /(N/m) 37 13 - 77
Resonance Frequency /kHz 300 200 - 400
HARTA-12-2  40  300  AppNano ▪ Non-contact cantilever with high aspect ratio tip (>5:1)
▪ Backside reflex coating (Al)
▪ High aspect ratio portion of the tip tilted 12°
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.5 4.0 - 5.0
Mean Width /µm 35.0 30.0 - 40.0
Length /µm 125.0 115.0 - 135.0
Force Constant /(N/m) 40 25 - 75
Resonance Frequency /kHz 300 200 - 400
HARTA-12-4  40  300  AppNano ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~4 um
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.5 4.0 - 5.0
Mean Width /µm 35.0 30.0 - 40.0
Length /µm 125.0 115.0 - 135.0
Force Constant /(N/m) 40 25 - 75
Resonance Frequency /kHz 300 200 - 400
HARTA-12-6  40  300  AppNano ▪ Non-contact cantilever with high aspect ratio tip
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~6 um
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.5 4.0 - 5.0
Mean Width /µm 35.0 30.0 - 40.0
Length /µm 125.0 115.0 - 135.0
Force Constant /(N/m) 40 25 - 75
Resonance Frequency /kHz 300 200 - 400
EBD2-100A  40  320  nanotools ▪ Non-contact cantilever with high aspect ratio tip (>6:1) (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~2 um
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
EBD4-200A  40  320  nanotools ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~4 um (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
EBD6-400A  40  320  nanotools ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~6 um (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
EBD8-600A  40  320  nanotools ▪ Non-contact cantilever with high aspect ratio tip (>10:1) (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 13°
▪ Typical tip length: ~8 um (max.)
▪ Package of 5 (EA)		  Request Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
MCNT-100™ Park AAFM  40  320  nanotools ▪ Non-contact cantilever with narrow width and high aspect ratio tip (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~100 nm
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
MCNT-150™ Park AAFM  40  320  nanotools ▪ Non-contact cantilever with narrow width and high aspect ratio tip (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~150 nm (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
M-CNT-300  40  320  nanotools ▪ Non-contact cantilever with narrow width and high aspect ratio tip (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~300 nm (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
M-CNT-400  40  320  nanotools ▪ Non-contact cantilever with narrow width and high aspect ratio tip (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~400 nm (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
M-CNT-500  40  320  nanotools ▪ Non-contact cantilever with narrow width and high aspect ratio tip (HDC/DLC)
▪ Backside reflex coating (Al)
▪ Tip tilt compensation: 12°
▪ Typical tip length: ~500 nm (max.)
▪ Package of 5 (EA)		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 4.4 3.9 - 4.9
Mean Width /µm 30.0 28.0 - 32.0
Length /µm 120.0 115.0 - 125.0
Force Constant /(N/m) 40 20 - 60
Resonance Frequency /kHz 320 270 - 370
HI'RES-C14/Cr-Au  5  160  MikroMasch ▪ Non-contact cantilever with low resonant frequency
▪ Backside reflective coating (Au)
▪ Tip radius: 1 nm typical		  Request for Quote
Technical Data Nominal Value Specified Range
Thickness /µm 2.1 1.6 - 2.6
Mean Width /µm 25.0 22.0 - 28.0
Length /µm 125.0 120.0 - 130.0
Force Constant /(N/m) 5 1.8 - 13
Resonance Frequency /kHz 160 110 - 160
Scout 70 2 70 ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (Al)
▪ Typical tip length: 5 - 8 μm
▪ Typical tip radius: ~5 nm		 Request for Quote
Scout 150 18 150 ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (Al) (Al)
▪ Typical tip length: 5 - 8 μm
▪ Typical tip radius: ~5 nm 		Request for Quote
Scout 350 42 350 ▪ Non-contact cantilever with high resonant frequency
▪ Backside reflex coating (Al) (Al)
▪ Typical tip length: 5 - 8 μm
▪ Typical tip radius: ~5 nm 		Request for Quote


 

Request Quote

Please fill in all required fields(*) to ensure we can process your request as quickly as possible.

 


探针商店 (Not USED)

版权 © 2024 韩国帕克股份有限公司北京代表处 | Park Systems, 扫描隧道显微镜(SPM), 研究用, 工业用 (京ICP备2020037944号-1) 保留所有权利